DRAKA Instrument Cable - Fire Resistant - Overall Screen - Armoured(SWA) CU/MGT/XLPE/OSCR/LSHF/SWA/LSHF-AT-AR 500V to BS EN50288-7, IEC60332-3-22, IEC 60331-21   Application Instrumentation cables are used in data processing and process control.The electrostatic screen protect the screened pairs against outer electrostatic interference fields. Low level of line attenuations and low mutual capacitances enable long transmission distances fast pulse accelerations in damp locations, in open spaces and for underground laying. The cables are mainly used in petroleum and petrol chemical industry. Incorporation with layer of fire proof barrier, these cables are mainly used for those critical areas that require circuit integrity in the emergency systems such as emergency exit lights, emergency lifts, sprinkles, smoke and heat detectors etc.   Cable Structure & Features Conductor (Cu) Plain annealed stranded copper conductor Class 2, IEC 60228, BS6360 Fire proof layer (MGT) Mica glass tape Insulation  (XLPE) Cross-linked Polyethylene Pairing / Twining Two/Three/Four insulated cores are cabled together and covered with a polyester tape wrapping Assembly Multiple pairs/triads/quads are cabled together, supplied with non-hygroscopic filler (optional) to obtain a circular construction and covered with a polyester tape wrapping Overall Screen (OS), Min. 20% overlap of aluminium backed polyester tape in contact with 0.5mm² (16/0.20mm) tinned annealed drain wire followed by a polyester tape wrapped over the screening tape Bedding (LSHF) Low Smoke Halogen Free -Black Armouring (SWA) Galvanized Steel Wire Armour Outer Sheath (LSHF-AT-AR) Low smoke zero halogen compound with anti-termite and anti-rodent additives. Black (Optional: Blue colour for Intrinsically  Safe) Insulation color 1 pair in Black & White 2 pair & above -each pair in Black & White core with numbering. 1 triad in Black, White & Red 2 triad & a bove –each triad in Black, White & Red printed with   numbering. Technical Data Reference Standard BS EN 50288-7 Voltage 500V Max Operating Temperature +90ºC Halogen Free IEC 60754 Low Smoke Emission IEC 61034 Fire Integrity IEC 60331-21 Flame Retardant IEC 60332-3-22 Max. Conductor Resistance ≤7.6Ω/km at  20°C(2.5mm²) ≤12.3Ω/km at  20°C(1.5 mm²) ≤18.4Ω/km at  20°C(1.0 mm²) ≤26.5Ω/km at  20°C(0.7 5mm²) Max. Mutual Capacitance(at 1 KHz) ≤ 85pF/min    (1.5-2.5 mm²) ≤ 75pF/min    (0.5-1.0 mm²) Max. L  /R Ratio ≤ 40pF/min (1.5-2.5 mm²) ≤ 25pF/min (0.75-1.0 mm²) Test Voltag 2000Vac for 1 minute Bending Radius 10 x overall diameter   read more

DRAKA LV POWER CABLE - Fire Resistant - Armoured(SWB) CU/MGT/XLPE/LSHF/SWB/LSHF-AT-AR 600/1000V TO IEC60502-1, IEC60332-3-22, IEC 60331-21 Cable Type :   CU/MGT/XLPE/LSHF/SWB/LSHF-AT-AR Voltage :    600/1000V Design Standard :   IEC 60502-1 Conductor Standard :  IEC 60228, BS 6360 Flame Propagation :  IEC 60332-3-22 Fire Integrity :  IEC60331-21 read more

Draka RS485 Armoured SWB Cable RS485: CU/XLPE/OSCR+TCWB/LSHF/SWB/LSHF-AT-AR  2pair x 0.5mm²(20AWG) Application For multidropped, medium-speed, serial data communication In electrically noisy Industrial  environments, Application includes industrial networks using RS-485/RS-422 transcievers: - RS-422 systems for Process Automation (chemicals, brewing, paper mills). factory automation  (autos, metal fabrication), HVAC, security, motor control and motion control, - Suitable for outdoor installation due to steel wire braiding,   Fire Rating • IEC 60332-1,IEC 61034-2, IEC 60754-1/2 • Anti-termite and anti-rodent additives     read more

CSEP 600/1000V VK, ZK Single Core Cable Flexible, Non-Sheathed, Heat Resistant   Application Used for wiring in switchboard panels, distributors, electrical equipments, also for fixed  protected instal- lation in lighting or controlgear. The cables shall be installed in tubes,  surface mounted or embedded conduits or similar closed systems.   Construction Fine Stranded Plain annealed copper acc. to IEC 60228 Class 5 Insulation compound V type: PVC compound Z type: Low Smoke Halogen Free (LSHF) Core identification: Black, Blue, Brown, Grey, Red, White, Green/Yellow Technical Data   Operating temp:-20°C to 105°C Voltage rating:600/1000V Test voltage:min. 3500V Insulation resistance: min. 20 MΩ x km Min. bending radius: - OD<8mm                  4 x D - 8mm - OD>12mm                6 x D Flame retardant acc. to IEC 60332-1 Upon Request Tinned copper conductor Anti-termite, anti-rodent material         read more

CSEP DC Flexible Cable Class 5  600/1000V CU/PVC/PVC-FR (2core - Red & Blue) Application Used in control panels, UPS, rectifier and electrical equipments, on and under plaster as laid in conduit.  Construction: PVC insulated & PVC Sheated flexible wires with fine stranded copper conductors (Class 5)  Colours: 2core - Red , Blue (other color can be on request) Max. operating temperature 70ºC Max. short circuit temperature 160ºC Fire performance  According to IEC 60332-1-2 read more

CSEP Instrument Cable - Flame Retardant - Overall Screen - Armoured(SWA) CU/XLPE/OSCR/PVC/SWA/PVC-FR 500V to BS EN50288-7 IEC332-3-24 Application Instrumentation cables are used in data processing and process control. The electrostatic screen protect the screened pairs against outer electrostatic interference fields. Low level of line attenuations and low mutual capacitances enable long transmission distances fast pulse accelerations. Steel wire armoured version are suitable for fixed installations in damp locations, in open spaces and for underground laying.   Cable Structure & Features Conductor (Cu) Plain annealed stranded copper conductor Class 2, IEC 60228, BS6360 Insulation  (XLPE) Cross-linked Polyethylene Pairing / Twining Two/Three/Four insulated cores are cabled together and covered with a polyester tape wrapping Assembly Multiple pairs/triads/quads are cabled together, supplied with non-hygroscopic filler (optional) to obtain a circular construction and covered with a polyester tape wrapping Overall Screen (OS), Min. 20% overlap of aluminium backed polyester tape in contact with 0.5mm² (16/0.20mm) tinned annealed drain wire followed by a polyester tape wrapped over the screening tape Bedding (PVC) Polyvinly Chloride -Black Armouring (SWA) Galvanized Steel Wire Armour Outer Sheath (PVC-FR) PVC compound with Flame redartant . Black (Optional: Blue colour for IS - Intrinsically Safe) Insulation color 1 pair in Black & White 2 pair & above -each pair in Black & White core with numbering. 1 triad in Black, White & Red 2 triad & a bove –each triad in Black, White & Red printed with   numbering. Technical Data Reference Standard BS EN 50288-7 Voltage 500V Max Operating Temperature +90ºC Flame Retardant IEC 60332-3-22 Max. Conductor Resistance ≤7.6Ω/km at  20°C(2.5mm²) ≤12.3Ω/km at  20°C(1.5 mm²) ≤18.4Ω/km at  20°C(1.0 mm²) ≤26.5Ω/km at  20°C(0.7 5mm²) Max. Mutual Capacitance(at 1 KHz) ≤ 85pF/min    (1.5-2.5 mm²) ≤ 75pF/min    (0.5-1.0 mm²) Max. L  /R Ratio ≤ 40pF/min (1.5-2.5 mm²) ≤ 25pF/min (0.75-1.0 mm²) Test Voltag 2000Vac for 1 minute Bending Radius 10 x overall diameter     read more